Senin, 01 Juni 2009

Bending the Elevator Trailing Edges

After a little bit of a break working on the vehicle in the background (the famous Dodge Dart), I finally got my bending brake made for bending the trailing edges of the elevators. The hardest part was finding a straight board. I make sure I used plenty of hinges as I've read you can't have too many.



It's pretty simple, really. You just put the part between the boards and smoosh it. The trick is getting the correct radius of the bend. Too much and the aluminum will crack, too little and it will affect the flying qualities. I'm getting close to the goldilocks amount.